KAPA ENGINEERING

Pellets - Wood chips - Agricultural residues - Sludge - Digestate

ERCOLE SOLID BIOFUEL BURNERS

"GREEN" burners for sustainable development

One of the most important targets of KAPA ENGINEERING is to guarantee energy production solutions with maximum efficiency.
Based on our many years of experience and results, we design and produce biomass boilers.

H 0.9

THERMAL POWER	900 KWt
FUEL	ALL BIOFUELS
MAXIMUM FUEL MOISTURE	25 %

H 1.2

THERMAL POWER	1250 KWt
FUEL	ALL BIOFUELS
MAXIMUM FUEL MOISTURE	27 %

H 1.75

THERMAL POWER	1750 KWt
FUEL	ALL BIOFUELS
MAXIMUM FUEL MOISTURE	27 %

H 2.2

THERMAL POWER	2250 KWt
FUEL	ALL BIOFUELS
MAXIMUM FUEL MOISTURE	28 %

The power of solid fuel burners is linked to the energy yield of the material and the humidity contained. The nominal values of the power above are indicative for solid pelletized fuels with thermal power equal to 4,500 kcal/kg and contained humidity equal to 12-14%.
If an exchanger is installed after the burner for the production of hot air or in any case another carrier for the transport of energy, it is necessary to take into account the efficiency coefficient of the same exchanger for the correct sizing of the burner.

CLEAN AND EFFICIENT COMBUSTION
UP TO 2.2 MW

The advanced combustion technology of industrial boilers achieves emissions levels similar to those of a modern gas combustion system and maintains CO and NOx releases at levels that match those of an advanced fossil fuel heating system. Furthermore, unlike oil and gas, biomass is a renewable and CO2-neutral source of energy. When used together with our digital power modulating control, ERCOLE industrial burners reach eﬃciency levels of up to 90%.